PE-180D
 |
Preguntas frecuentes y solución de problemas |
PE-180D
Fecha: 14/05/2015 ID: faqh00000021_000
Why is the outline sewing off the pattern?
This happens mainly when the fabric is not set to the embroidery frame correctly or the upper thread is too tight.
-
Improper backing material (stabilizer) is put on the fabric.
Thick stabilizer has to be used for elastic or thin fabric.
One Point Advice Fabrics and stabilizer material for embroidery
- The fabric has to be set to the frame tight enough.
One Point Advice Embroidery
- Decrease the upper thread tension manually to the basic thread tension setting or less.
Preguntas frecuentes relacionadas
HE-120, Innov-is 1000, Innov-is 1200, Innov-is 1500D/1500, Innov-is 2500D, Innov-is 4000D/4000, Innov-is 4500D, Innov-is 500D, Innov-is 900D, Innov-is 950D, Innov-is 990D, Innov-is BP2100, Innov-is BP2150L, Innov-is VE2300, Innov-is VM5100, Innov-is VM6200D, PC-6500, PC-8500/8500D, PE-150V, PE-170D, PE-180D, PE-300S, PE-430, PE-450, PE500, PE-700/750D, PE-700II/750D(USB), PE-770, PE-780D, SE-270D, SE-350, ULT2001/2001N/2001C/2002D/2003D
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Observe que este formulario solo se utiliza para comentarios.