DCP-T300
![]() |
Preguntas frecuentes y Solución de problemas |
![](/g/b/img/product/dcpt300_all.jpg)
DCP-T300
Fecha: 02/03/2015 ID: faq00002411_029
Cover is Open
The scanner cover is not locked in the closed position. Check if the scanner cover is completely closed.
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
- Lift the scanner cover (1).
-
Gently push the scanner cover support down (2) and close the scanner cover (3) using both hands.
- Make sure the telephone line cord and USB cable (if used) have been guided correctly through the cable channel and out the back of the machine.
DCP-T300, DCP-T500W, DCP-T700W, MFC-T800W
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.