HL-L3290CDW
Preguntas frecuentes y Solución de problemas |
HL-L3290CDW
Fecha: 25/06/2019 ID: faq00002306_011
The color of your printouts is not what you expected
Check the following points to resolve the issue:
-
To improve the color density, calibrate the colors using first the Touchscreen/Control Panel and then the printer driver.
> Click here to see how to carry out calibration. -
To adjust the print position of colors for sharper edges, perform the color registration using the Touchscreen/Control Panel.
> Click here to see how to perform the color registration. - Adjust the copy density and contrast if you are copying.
- Make sure Toner Save mode is off in the Touchscreen/Control Panel or the printer driver.
- If the print quality is poor, clear the Improve Gray Color check box in the printer driver.
- If the print quality of the black portion is not what you expected, select the Enhance Black Printing check box in the printer driver.
-
Identify the color causing the issue and put in a new toner cartridge.
To identify the color of the toner cartridge and replace toner cartridge, follow the steps below:- > Click here to print the chart. [345KB/ PDF]
- Compare your printed document with the printed chart to identify the color causing the issue.
-
Replace the toner cartridge of the color.
> Click here to see how to replace the toner cartridge.
-
Install a new drum unit.
> Click here to see how to replace the drum unit.
DCP-L3551CDW, HL-L3290CDW, MFC-L3710CW, MFC-L3750CDW, MFC-L8610CDW, MFC-L8900CDW
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.