MFC-L2700DW
Preguntas frecuentes y Solución de problemas |
MFC-L2700DW
Fecha: 24/03/2016 ID: faq00000310_018
Jam 2-sided
If the machine's control panel or the Status Monitor displays there is a jam in the 2-sided paper tray, do the following steps.
-
Pull the paper tray completely out of the machine.
-
At the back of the machine, pull the 2-sided tray completely out of the machine.
-
Pull the jammed paper out of the machine or out of the 2-sided tray.
-
Remove paper that may have jammed under the machine due to static electricity.
-
If paper is not caught inside the 2-sided tray, open the back cover.
HOT SURFACE
The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching them.
-
Use both hands to gently pull the jammed paper out of the back of the machine.
- Close the back cover until it locks in the closed position.
- Put the 2-sided tray firmly back in the machine.
- Put the paper tray firmly back in the machine.
Preguntas frecuentes relacionadas
DCP-L2540DW, MFC-L2700DW, MFC-L2720DW, MFC-L2740DW
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.