HL-4570CDW
Preguntas frecuentes y Solución de problemas |
HL-4570CDW
Fecha: 05/07/2010 ID: faq00000309_013
Jam Rear
If a paper jam occurs behind the back cover, follow these steps:
- Leave the machine turned on for 10 minutes to cool down.
- Open the back cover.
After you have just used the machine, some internal parts of the machine will be extremely hot. Wait for the machine to cool down before you touch the internal parts of the machine.
- Pull the green tabs (2) at the left and right hand sides toward you and fold down the fuser cover (1).
If the envelope levers (3) inside the back cover are pulled down to the envelope position, lift these levers to the original position before pulling the green tabs (2) down.
- Using both hands, gently pull the jammed paper out of the fuser unit.
- Close the fuser cover (1).
If you print on envelopes, pull down the envelope levers (2) to the envelope position again before closing the back cover.
- Close the back cover.
Preguntas frecuentes relacionadas
HL-4150CDN, HL-4570CDW, HL-4570CDWT
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.