HL-4570CDW
Preguntas frecuentes y Solución de problemas |
HL-4570CDW
Fecha: 05/07/2010 ID: faq00000307_015
Jam Tray 1 / Jam Tray 2
The LCD names for the paper trays are as follows.
Tray type | Tray name |
Standard paper tray | TRAY 1 |
Optional lower tray | TRAY 2 |
If a paper jam occurs inside the paper tray, follow these steps:
-
Pull the paper tray completely out of the machine.
DO NOT touch the shaded parts shown in the illustration. These rollers may be rotating at high speed and
can pinch or entrap your hand. -
Use both hands to slowly pull out the jammed paper.
Pulling out the jammed paper downward allows you to remove the paper easier.
-
Make sure that the paper is below the maximum paper mark . While pressing the green
paper-guide release lever, slide the paper guides to fit the paper size. Make sure that the guides are
firmly in the slots. -
Put the paper tray firmly back in the machine.
Preguntas frecuentes relacionadas
HL-4150CDN, HL-4570CDW, HL-4570CDWT
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Observe que este formulario solo se utiliza para comentarios.