DCP-T310
Preguntas frecuentes y Solución de problemas |
DCP-T310
Fecha: 26/04/2018 ID: faq00000110_513
Set Sleep Mode Countdown
The Sleep Mode (or Power Save Mode) setting can reduce power consumption. When the machine is in Sleep Mode, it acts as though it is turned off. The machine will wake up and start printing when it receives a print job or a fax. Use these instructions to set a time delay (countdown) before the machine enters Sleep Mode.
- The timer will restart if any operation is carried out on the machine, such as receiving a fax or a print job.
- The factory setting is five minutes.
- When the machine goes into Sleep Mode, the LCD backlight turns off.
DCP-T310/DCP-T510W/DCP-T710W/MFC-T810W
- Press Menú (Menu).
- Press or to select the following:
- Select [General Setup]. Press OK.
- Select [Ecology]. Press OK.
- Select [Sleep Mode]. Press OK.
- Select [1 Min], [2 Mins], [3 Mins], [5 Mins], [10 Mins], [30 Mins], or [60 Mins]. Press OK.
- Press Detener/Salir (Stop/Exit).
MFC-T910DW
- Press Ajustes (Settings).
- Press or to select the following:
- Select [General Setup]. Press OK.
- Select [Sleep Mode]. Press OK.
- Select [1Min], [2Mins], [3Mins], [5Mins], [10Mins], [30Mins], or [60Mins]. Press OK.
- Press Detener/Salir (Stop/Exit).
DCP-T310, DCP-T510W, DCP-T710W, MFC-T910DW
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.