SuperGalaxie 3000/3000C/3000D/3100D
FAQ e Risoluzione dei problemi |
SuperGalaxie3000/3100D
Data: 04/06/2018 ID: faqh00000188_000
"Raise presser foot lever." message appearing on the LCD.
What does it mean?
This message is displayed when the embroidery unit is trying to initialize while the embroidery foot is lowered.
Each time a key is pressed or an incorrect operation is performed, a beep is sounded.
-
For a correct operation
One beep is sounded. -
If an incorrect operation is performed
Two or four beeps are sounded. -
If the machine locks up, for example, because the thread is tangled
The sewing machine continues to beep for four seconds.
The machine automatically stops.
Be sure to check for the cause of the error, and correct it before continuing to sew.
Innov-is 1200, Innov-is 1250, Innov-is 700E, Innov-is 700EII, Innov-is 750E, Innov-is 900, Innov-is 90E, Innov-is 950, Innov-is 955, Innov-is 97E, SuperGalaxie 3000/3000C/3000D/3100D
Per richiedere ulteriore assistenza, contattare il servizio assistenza clienti Brother:
Feedback sui contenuti
Di seguito è possibile fornire il proprio feedback che ci consentirà di migliorare il servizio assistenza.
Passo 1: le informazioni contenute in questa pagina sono risultate utili?
Passo 2: si desidera aggiungere un commento?
Questo modulo viene utilizzato esclusivamente con finalità di feedback.