Innov-is A80
![]() |
FAQ e Risoluzione dei problemi |
![](/g/b/img/product/hf_inova80euk.jpg)
Innov-is A80
Data: 02/11/2020 ID: faqh00000064_001
"E4" message appears on the LCD.
Cause
This message is displayed when an erroneous operation is performed as follows.
- The Reverse/Reinforcement stitch button is pressed while the bobbin winder shaft is moved to the right.
- The Needle position button is pressed while the bobbin winder shaft is moved to the right.
Solution
Move the bobbin winder shaft to the left before continuing the operation.
CX70PEs, FS40s, FS60x, FS70WTx, Innov-is A50, Innov-is A60SE, Innov-is A65, Innov-is A80, KD40s
Per richiedere ulteriore assistenza, contattare il servizio assistenza clienti Brother:
Feedback sui contenuti
Di seguito è possibile fornire il proprio feedback che ci consentirà di migliorare il servizio assistenza.
Passo 1: le informazioni contenute in questa pagina sono risultate utili?
Passo 2: si desidera aggiungere un commento?
Questo modulo viene utilizzato esclusivamente con finalità di feedback.