Innov-is A80
![]() |
FAQ e Risoluzione dei problemi |
![](/g/b/img/product/hf_inova80euk.jpg)
Innov-is A80
Data: 02/11/2020 ID: faqh00000061_001
"E3" message appears on the LCD.
Cause
This message is displayed when an erroneous operation is performed as follows.
- The Start/Stop button is pressed while the buttonhole or bar tack stitch is selected and the buttonhole lever is raised.
- The Reverse/Reinforcement stitch button is pressed while the buttonhole or bar tack stitch is selected and the buttonhole lever is raised.
- The foot controller is pressed while the buttonhole or bar tack stitch is selected and the buttonhole lever is raised.
Solution
Lower the buttonhole lever before continuing the operation.
CX70PEs, FS40s, FS60x, FS70WTx, Innov-is A50, Innov-is A60SE, Innov-is A65, Innov-is A80, KD40s
Per richiedere ulteriore assistenza, contattare il servizio assistenza clienti Brother:
Feedback sui contenuti
Di seguito è possibile fornire il proprio feedback che ci consentirà di migliorare il servizio assistenza.
Passo 1: le informazioni contenute in questa pagina sono risultate utili?
Passo 2: si desidera aggiungere un commento?
Questo modulo viene utilizzato esclusivamente con finalità di feedback.