MFC-L2700DN
FAQ e Risoluzione dei problemi |
MFC-L2700DN
Data: 24/03/2016 ID: faq00000310_018
Jam 2-sided
If the machine's control panel or the Status Monitor displays there is a jam in the 2-sided paper tray, do the following steps.
-
Pull the paper tray completely out of the machine.
-
At the back of the machine, pull the 2-sided tray completely out of the machine.
-
Pull the jammed paper out of the machine or out of the 2-sided tray.
-
Remove paper that may have jammed under the machine due to static electricity.
-
If paper is not caught inside the 2-sided tray, open the back cover.
HOT SURFACE
The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching them.
-
Use both hands to gently pull the jammed paper out of the back of the machine.
- Close the back cover until it locks in the closed position.
- Put the 2-sided tray firmly back in the machine.
- Put the paper tray firmly back in the machine.
FAQ correlate
DCP-L2500D, DCP-L2540DN, MFC-L2700DN, MFC-L2700DW, MFC-L2720DW, MFC-L2740DW
Per richiedere ulteriore assistenza, contattare il servizio assistenza clienti Brother:
Feedback sui contenuti
Di seguito è possibile fornire il proprio feedback che ci consentirà di migliorare il servizio assistenza.
Passo 1: le informazioni contenute in questa pagina sono risultate utili?
Passo 2: si desidera aggiungere un commento?
Questo modulo viene utilizzato esclusivamente con finalità di feedback.