FAQs & Troubleshooting

Close

DCP-585CW

FAQs & Troubleshooting

FAQs & Troubleshooting

DCP-585CW

Not your product?

Date: 06/04/2020 ID: faq00100617_000

I'm using Ubuntu 11.10 or higher. I cannot scan from my Brother Machine. (Linux)

Install the scan driver.

 

Copy the following files under /usr/lib64/ to /usr/lib/.

 

For brscan Users:

/usr/lib64/libbrcolm.so.1.0.1
/usr/lib64/libbrscandec.so.1.0.0
/usr/lib64/sane/libsane-brother.so.1.0.7
/usr/lib64/sane/libsane-brother.so
/usr/lib64/sane/libsane-brother.so.1
/usr/lib64/libbrscandec.so.1
/usr/lib64/libbrcolm.so
/usr/lib64/libbrcolm.so.1
/usr/lib64/libbrscandec.so
 

For brscan2 Users:

/usr/lib64/libbrscandec2.so.1.0.0
/usr/lib64/sane/libsane-brother2.so.1.0.7
/usr/lib64/sane/libsane-brother2.so.1
/usr/lib64/sane/libsane-brother2.so
/usr/lib64/libbrcolm2.so.1.0.1
/usr/lib64/libbrcolm2.so
/usr/lib64/libbrscandec2.so.1
/usr/lib64/libbrscandec2.so
/usr/lib64/libbrcolm2.so.1
 

For brscan3 Users:

/usr/lib64/libbrscandec3.so.1.0.0
/usr/lib64/sane/libsane-brother3.so.1.0.7
/usr/lib64/sane/libsane-brother3.so.1
/usr/lib64/sane/libsane-brother3.so
/usr/lib64/libbrscandec3.so
/usr/lib64/libbrscandec3.so.1
 

 

Example
command(For brscan3 Users):

 

cp /usr/lib64/libbrscandec3.so.1.0.0 /usr/lib
cp /usr/lib64/sane/libsane-brother3.so.1.0.7 /usr/lib/sane
cp /usr/lib64/sane/libsane-brother3.so.1 /usr/lib/sane
cp /usr/lib64/sane/libsane-brother3.so /usr/lib/sane
cp /usr/lib64/libbrscandec3.so /usr/lib
cp /usr/lib64/libbrscandec3.so.1 /usr/lib

Related Models

DCP-145C, DCP-165C, DCP-185C, DCP-385C, DCP-585CW, DCP-6690CW, DCP-7010, DCP-7030, DCP-7040, DCP-9010CN, DCP-J125, FAX-2820, MFC-250C, MFC-290C, MFC-3360C, MFC-490CW, MFC-6490CW, MFC-6890CDW, MFC-7220, MFC-7340, MFC-790CW, MFC-8380DN, MFC-8880DN, MFC-9010CN, MFC-9120CN, MFC-9320CW, MFC-9450CDN, MFC-990CW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.