FAQs & Troubleshooting

Close

DCP-9010CN

FAQs & Troubleshooting

FAQs & Troubleshooting

DCP-9010CN

Not your product?

Date: 18/06/2013 ID: faq00002930_000

Which connection can I use to print from my device (iPhone, iPod touch, iPad) using the Brother iPrint&Scan?

In order to use Brother iPrint&Scan, your Apple mobile device must connect using a Wi-Fi connection to the same network that the Brother machine is connected. The network can use either Ad-hoc mode (Fig.1 - connected directly to the machine without a router/access point) or Infrastructure mode (Fig.2/Fig.3 - connected to a network through a router/access point).

image
  Fig.1 (Ad-hoc Mode connection between Brother machine and Mobile device)  


For an Infrastructure mode network, the Brother machine may be connected using either a Wireless (Fig.2) network connection or a Wired Ethernet (Fig.3) network connection depending on which connections are supported by your Brother machine. 

image
 Fig.2 (Brother Machine Using Wireless Connection)

image
 Fig.3 (Brother Machine Using Wired Ethernet Connection)

Related FAQs

Related Models

DCP-1616NW, DCP-585CW, DCP-6690CW, DCP-7065DN, DCP-9010CN, DCP-J105, DCP-T500W, DCP-T700W, HL-1211W, HL-2270DW, HL-3150CDN, HL-4050CDN, HL-4150CDN, HL-5470DW, HL-6180DW, MFC-1911NW, MFC-490CW, MFC-6490CW, MFC-6890CDW, MFC-7860DN, MFC-7860DW, MFC-790CW, MFC-8380DN, MFC-8510DN, MFC-8880DN, MFC-9010CN, MFC-9120CN, MFC-9140CDN, MFC-9320CW, MFC-9450CDN, MFC-990CW, MFC-9970CDW, MFC-J200, MFC-J2510, MFC-J430W, MFC-J5910DW, MFC-J625DW, MFC-J6910DW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.