PT-9700PC
 |
FAQs & Troubleshooting |
PT-9700PC
Date: 09/11/2018 ID: faqp00100410_000
Creating a label with GIMP (Linux)
To create a label with GIMP, do the following procedure.
- Open a new file with an image size that suits the label.
- Edit the image.
-
Open the print menu and set the following configuration for your printer.
"Image Settings" Tab -> "Adjust Page Size and Orientation"Media length for continuous tape is about 100mm.
Use the paper tool command to add a custom media size longer/shorter than 100mm.
For more information, see "Adding a custom media size for continuous tape (Linux)".
PT-9500PC, PT-9700PC, PT-9800PCN, PT-P900W/P900Wc, PT-P950NW, QL-1050, QL-1050N, QL-1060N, QL-500, QL-500A, QL-550, QL-570, QL-580N, QL-600, QL-650TD, QL-700, QL-710W, QL-720NW, QL-800, QL-810W/810Wc, QL-820NWB/820NWBc, RJ-2030, RJ-2050, RJ-2140, RJ-2150, RJ-3050, RJ-3150, RJ-3230B, RJ-3250WB, RJ-4230B, RJ-4250WB, TD-2020/2020A, TD-2120N, TD-2125N, TD-2125NWB, TD-2130N, TD-2135N, TD-2135NWB, TD-4000, TD-4100N, TD-4210D, TD-4410D, TD-4420DN/4420DN(FC), TD-4520DN, TD-4550DNWB / 4550DNWB(FC)
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.