PJ-762
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/pj762euk.jpg)
PJ-762
Date: 24/09/2015 ID: faqp00001469_005
How to install the rechargeable Li-ion battery (optional)
- Move battery latch 1 to the unlock position.
-
While holding battery latch 2 in the unlock position, remove the battery cavity mounting block.
1. Battery latch 1
2. Battery latch 2
3. Battery cavity mounting block -
Release battery latch 2.
Battery latch 2 moves back to the lock position. -
Insert the battery into the battery cavity until it locks into place.
4. Battery cavity
5. Rechargeable Li-ion battery -
Move battery latch 1 to the lock position.
- The voltage supplied by the rechargeable Li-ion battery may vary. The printing speed may also vary depending on the voltage.
- When the battery is being used, the battery cavity mounting block is not needed. Keep it in a safe place to avoid losing it.
Removing the Rechargeable Li-ion Battery
-
Move the battery latches to the unlock position, and then remove the battery.
1. Battery latches - Insert the battery cavity mounting block into the battery cavity until it locks into place.
- Move battery latch 1 to the lock position.
Related FAQs
PJ-722, PJ-723, PJ-762, PJ-763, PJ-763MFi, PJ-773
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.