DS-720D
 |
FAQs & Troubleshooting |
DS-720D
Date: 05/11/2013 ID: faq00003091_000
Change the paper settings. (Using DSmobileCapture)
Follow the steps below to change paper settings.
NOTE: Illustrations and instructions may vary depending on the application you are using.
- Launch DSmobileCapture.
- Connect the supplied Micro USB cable to the Micro USB port on the rear of your scanner. Connect the cable to your computer.
- Double-click the DSmobileCapture icon
.
- The Select Scanner Model dialog box appears. Select TWAIN under Driver Type and select your model under Scanner Model, and then click OK.
- DSmobileCapture launches.
- Connect the supplied Micro USB cable to the Micro USB port on the rear of your scanner. Connect the cable to your computer.
- Click Setup.
- Click the Paper tab.
- Change the settings you want, and then click OK. Continue scanning operation.
- Launch DSmobileCapture.
- Connect the supplied Micro USB cable to the Micro USB port on the rear of your scanner. Connect the cable to your computer.
- Double-click the DSmobileCapture icon
.
- DSmobileCapture launches.
- Connect the supplied Micro USB cable to the Micro USB port on the rear of your scanner. Connect the cable to your computer.
- Click the Paper and change the settings you want. Continue scanning operation.
DS-620, DS-720D, DS-820W, DS-920DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.