TJ-4021TNR
FAQ et Diagnostic |
TJ-4021TNR
Date: 10/12/2021 ID: faqp00100470_004
How to reset the printer settings by directly operating the printer
Printer initialization clears the printer's DRAM and restores its factory settings.
- Turn off the printer.
- Press and hold the right Selection button, and then turn on the printer.
- Release the button when Factory Default appears on the Touchscreen.
After the initialization, the following factory settings will be restored:
Parameter | Default setting |
---|---|
Speed | 127 mm/sec (5 ips) (203 DPI) 76 mm/sec (3 ips) (300 DPI) |
Density | 8 |
Label Width | 101.5 mm (4") |
Label Height | 101.5 mm (4") |
Sensor Type | Gap sensor: TJ-4020TN, TJ-4021TN, TJ-4120TN, TJ-4121TN Black sensor: TJ-4021TNR, TJ-4121TNR |
Gap Setting | 3 mm (0.12") |
Print Direction | 0 |
Reference Point | 0,0 (upper left corner) |
Offset | 0 |
Tear Mode | On |
Peeler Mode | Off |
Cutter Mode | Off |
Rewinder Mode | Off |
Code Page | 850 |
Country Code | 001 |
Clear Flash Memory | No |
TJ-4021TN, TJ-4021TNR, TJ-4121TN
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?
Ce formulaire a pour seul but de nous faire part de vos commentaires.