TD-4750TNWBR
FAQ et Diagnostic |
TD-4750TNWBR
Date: 01/12/2021 ID: faqp00100470_001
How to reset the printer settings by directly operating the printer
Printer initialization clears the printer's DRAM and restores its factory settings.
- Turn off the printer.
- Press and hold the Feed/Pause button, and then turn on the printer.
-
Release the button after the LED flashes in amber five times and lights in green/red (blinks 5 times alternately).
The LED color will change as follows:
Amber (lit) > Red/Amber (blinks 5 times alternately) > Amber (5 times) > Green/Red (blinks 5 times alternately) (Release the button here) > Green (5 times) > Red (5 times) > Green (lit)
Parameter Default setting Speed 76 mm/sec (3 ips) Density 8 Label Width 101.5 mm (4") Label Height 101.5 mm (4") Sensor Type Gap sensor Gap Setting 3 mm (0.12") Print Direction 0 Reference Point 0,0 (upper left corner) Offset 0 Tear Mode On Label Peeler off Mode Off Cutter Mode Off Code Page 850 Country Code 001 Clear Flash Memory No
< Printer initialization from the LCD >
You can also activate printer initialization from the LCD.
- In the LCD, select the Menu icon .
- In the Main menu, select Advanced.
- Select Initialization.
TD-4650TNWB, TD-4650TNWBR, TD-4750TNWB, TD-4750TNWBR
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?
Ce formulaire a pour seul but de nous faire part de vos commentaires.