FAQ et Diagnostic

Fermer

TD-2125N

FAQ et Diagnostic

FAQ et Diagnostic

TD-2125N

Ce n'est pas votre produit?

Date: 01/11/2022 ID: faqp00001444_004

How do I reset network setting?

1. POWER indicator
2. (Power) button
3. Media exit
4. RD/Media Roll compartment top cover
5. STATUS indicator
6. (Feed) button
7. (Print) button
8. Cover release lever
  • To reset network settings and turn APIPA ON

     

    1. Press and hold the Power button to turn the printer off.
    2. Press and hold the Feed button and the Power button, until the POWER indicator lights in orange and the STATUS indicator blinks in green.
    3. While holding down the Power button, press the Feed button 2 times.
    4. Release the Power button.
      All network settings will be reset.
  • To reset network settings and turn APIPA OFF

     

    1. Press and hold the Power button to turn the printer off.
    2. Press and hold the Feed button and the Power button, until the POWER indicator lights in orange and the STATUS indicator blinks in green.
    3. While holding down the Power button, press the Feed button 4 times.
    4. Release the Power button.
      All network settings will be reset.

APIPA --- If you do not assign an IP address manually (using the BRAdmin software) or automatically (using a DHCP/BOOTP/RARP server), the Automatic Private IP Addressing (APIPA) protocol will automatically assign an IP address from the range 169.254.0.1 to 169.254.254.254.

Modèles apparentés

TD-2120N, TD-2125N, TD-2125NWB, TD-2130N, TD-2135N, TD-2135NWB

Pour toute assistance supplémentaire, contactez le service clientèle de Brother:

Commentaires sur le contenu

Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?

Ce formulaire a pour seul but de nous faire part de vos commentaires.

Envoyer