SDX1200
 |
FAQ et Diagnostic |
SDX1200
Date: 28/08/2018 ID: faqh00000751_000
"Patterns cannot be welded. There are some patterns which cannot accept or no overlaps." message appearing on the LCD. What does it mean?
The message appears when you are welding patterns.
-
The patterns do not overlap. Rearrange them so the selected patterns overlap. Unifying the pattern, instead, can be an alternative editing method depending on your project.
-
A pattern that has a seam allowance is selected. Deactivate the seam allowance setting and weld the patterns.
- An open shape is selected as a pattern. Only closed shapes can be welded. Unifying the pattern, instead, can be an alternative editing method depending on your project.
Perform the necessary operation according to the instructions or the solution described.
If the problem persists, contact the Brother customer service or the nearest authorized service center.
CM260, CM300, CM600, CM700, CM840, CM900, SDX1000, SDX1200, SDX1250, SDX2200D, SDX2250D, SDX900
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Souhaitez-vous ajouter des commentaires?
Ce formulaire a pour seul but de nous faire part de vos commentaires.