Innov-is V3
![]() |
FAQ et Diagnostic |
![](/g/b/img/product/hf_inovv3euk.jpg)
Innov-is V3
Date: 14/05/2015 ID: faqh00000639_000
How do I attach or remove the embroidery frame ?
Wind and insert the bobbin before attaching the embroidery frame.
Attaching the Embroidery Frame
-
Press the “Presser Foot Lifter” button to raise the presser foot.
-
Align the embroidery frame guide with the right edge of the embroidery frame holder.
(1) Embroidery frame holder (2) Embroidery frame guide
-
Slide the embroidery frame into the holder,
making sure to align the embroidery frame’swith the holder’s
.
(1) Arrow mark
-
Lower the frame-securing lever to be level with the frame to secure the embroidery frame in the embroidery frame holder.
(1) Frame-securing lever
If the frame-securing lever is not lowered, the following message appears.
You cannot start sewing until you lower the frame-securing lever.
Removing the Embroidery Frame
-
Raise the frame-securing lever.
-
Pull the embroidery frame toward you.
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Souhaitez-vous ajouter des commentaires?
Ce formulaire a pour seul but de nous faire part de vos commentaires.