3034D
![]() |
FAQ et Diagnostic |
Date: 05/03/2009 ID: faqh00000526_000
To secure chain
There are two methods available to secure the chain.
Method 1
Secure the chain of the beginning and the end of
a stitch with your machine.
At the beginning of a stitch
- Sew a few stitches, after chaining-off for 5cm(2 inches).
- Stop the machine and raise the presser foot.
- Put the chain under the presser foot, and serge over it pulling toward you.
- After sewing a few stitches, cut off the extra chain with the knife as illustrated.
At the end of a stitch
- At the end of the seam, sew one stitch out of the fabric before stopping the machine.
- Raise the presser foot and the needles, then reverse the fabric.
- Lower the needles and the presser foot at the same position.
- Serge over the seam, taking care not to cut the serged seam with a knife.
- After sewing a few stitches, serge off the fabric as illustrated.
- Cut the threads with scissors.
Method 2
WIth this method, the chain of the beginning and the end of a stitch can be secured in the same manner.
- Tie the thread unpicked from chain.
- Insert the chain into the end of the seam, using a hand sewing needle with large eye.
- Fix the chain with a drop of fabric glue, and cut the extra stitches after drying.
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Souhaitez-vous ajouter des commentaires?
Ce formulaire a pour seul but de nous faire part de vos commentaires.