Innov-is VQ2
 |
FAQ et Diagnostic |
Innov-is VQ2
Date: 09/07/2019 ID: faqh00000244_001
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
This message is displayed when you try to recall or save a pattern while no USB media is loaded.
Check the following possible problems.
- Make sure that the USB media is completely inserted into the USB port on the machine. If the USB media is inserted, remove the USB media from the USB port and reinsert it.
- It may take a little time until the machine recognizes the USB media. Wait a few seconds and try again.
If the problem persists, use another USB media.
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Souhaitez-vous ajouter des commentaires?
Ce formulaire a pour seul but de nous faire part de vos commentaires.