Innov-is 1500D/1500
![]() |
FAQ et Diagnostic |
![](/g/b/img/product/hf_inov1500deuk.jpg)
Innov-is 1500D/1500
Date: 04/03/2009 ID: faqh00000233_000
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
This message is displayed when the speed control lever is set to control the zigzag stitch width, and the "Start/Stop" button is pushed.
Use the foot controller to operate the machine.
If the operation procedure was correct, the machine will beep once.
If the operation procedure was incorrect, the machine will beep twice or four times.
To turn the alarm on or off, press .
Innov-is 1500D/1500, Innov-is 2200, Innov-is 4000D/4000, Innov-is 5000, NX-2000, QC-1000, SuperGalaxie 3000/3000C/3000D/3100D
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Souhaitez-vous ajouter des commentaires?
Ce formulaire a pour seul but de nous faire part de vos commentaires.