CS-8120
 |
FAQ et Diagnostic |
CS-8120
Date: 13/11/2007 ID: faqh00000147_000
"Press needle position button to raise needle." appears on the LCD.
- You tried to select an embroidery pattern or change the layout when the needle was lowered.
- You tried to start sewing when the needle was lowered and without the thread cassette.
- The machine is turned on while the needle is lowered and the embroidery unit is attached.
Each time a key is pressed or an incorrect operation is performed, a beep is sounded.
- For a correct operation
One beep is sounded. - If an incorrect operation is performed
Two or four beeps are sounded. - If the machine locks up, for example, because the thread is tangled
The sewing machine continues to beep for four seconds.
The machine automatically stops.
Be sure to check for the cause of the error, and correct it before continuing to sew.
CS-8120, Innov-is 500D
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Souhaitez-vous ajouter des commentaires?
Ce formulaire a pour seul but de nous faire part de vos commentaires.