MFC-J491DW
 |
FAQ et Diagnostic |
MFC-J491DW
Date: 11/05/2020 ID: faq00100029_008
Enable the Brother machine's network interface.
Follow the steps below to enable or disable the Brother machine's network interface.
- Press Settings or Menu.
- Press the Up or Down arrow key to select Network and press OK.
- Press the Up or Down arrow key to select WLAN Enable and press OK.
- Press the Up or Down arrow key to select On or Off.
- Press OK.
- Press Stop/Exit.
(For wireless network users)
If you want to set up your Brother machine on a wireless network, see the following FAQ.
> Click here to see how to set up your Brother machine on a wireless network.
If your Brother machine still having an issue over the network feature, see the Related FAQs at the end of the page.
FAQ connexes
- I'm trying to install the driver with network settings, but I cannot locate a network connected Brother machine and complete the driver installation. (For Windows)
- I cannot scan via network.
- The printer status is Offline or Paused.
- "Offline" appears on the Status Monitor.
- My Brother machine could not be found over the network when I installed drivers on my computer.
- I cannot print using my Brother machine on a wireless network (Mac)
- I cannot print on a wireless (Wi-Fi) network (Windows)
DCP-7055W, DCP-J132W, DCP-J140W, DCP-J152W, DCP-J315W, DCP-J515W, DCP-J572DW, DCP-T500W, DCP-T510W, MFC-255CW, MFC-257CW, MFC-J265W, MFC-J415W, MFC-J430W, MFC-J470DW, MFC-J480DW, MFC-J491DW, MFC-J497DW
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?
Ce formulaire a pour seul but de nous faire part de vos commentaires.