MFC-J870DW
![]() |
FAQ et Diagnostic |
![](/g/b/img/product/mfcj870dw_us_eu_as.jpg)
MFC-J870DW
Date: 16/04/2013 ID: faq00002846_001
Copy a disc label or photo onto a printable disc.
Your Brother machine can print directly onto printable disc media, including CD-R/RW, DVD-R/RW, or Blu-ray Disc™.
Follow the steps below to copy a disc label or photo onto a printable disc:
- Make sure the Automatic Document Feeder (ADF) is empty.
- You can copy 12 cm disc label images.
- Make sure there is over 4 in. (10 cm) of free space behind the machine.
- 4 in. (10 cm)
- Press the LEFT OR RIGHT ARROW key to display Disc. (This step might be skipped in some models.)
- Press Disc on the screen.
You can also begin the print procedure by opening the Disc Guide.
- Do one of the following:
- If you want to copy a disc labe image, press Copy from Disc.
- If you want to copy a document, press Copy from Photo.
- If you want to copy a disc labe image, press Copy from Disc.
- Open the scanner cover and remove the Disc Tray, and then press OK.
- Press + or - to set the outside and inside diameters of the printable area of the disc, and then press OK.
Refer to the printable disc's package for the outside and inside deameter measurements.
- Place the disc or image you want to copy on the center of the flat scanner glass, and then press OK.
If the disc or image is not on the center of the flat scanner glass, the printed image will run off the disc.
- Press Start.
- The machine starts scanning the image. The printing preview will appear on the machine’s display (hereinafter called LCD).
- Adjust the image size and the position of the image you want to print, and then press OK.
- Only the area within the frame will be printed.
- Pressor
to change the image size.
- Press the UP, DOWN, LEFT, or RIGHT ARROW key on the LCD to move the position of the image.
- To do a test print on paper, press Test Print.
- If the Disc Guide is open, close it before performing the test print.
- If a disc is in the Disc Tray, remove the disc.
- Make sure Letter or A4 size paper is set in the paper tray.
You can only use Letter or A4 size paper for a test print.
- Press Start.
The machine starts printing the test image.
- Make sure the test print result looks correct.
If the test print result is not correct, press, readjust the printable area of the image, and then press OK.
- Press Start.
- Enter the number of copies you want either by pressing the indicated number directly or pressing + or -.
- Press Print Settings, if needed.
- Press Print Quality, and then select the Normal or Slow Drying option.
Use the Slow Drying option if the printout is smudged.
- Press OK.
- Press Print Quality, and then select the Normal or Slow Drying option.
- Press Print Disc.
- Push and pull down the Disc Guide to open it.
- Place a disc on the Disc Tray.
- Make sure to place the disc printed surface face up on the Disc Tray.
- Make sure there is no dirt on the Disc Tray.
- Insert the Disc Tray into the Disc Guide.
- Make sure to line up the triangular mark on the Disc Tray with the one on the Disc Guide.
Do not push the Disc Tray all the way into the Disc Guide. If you push the Disc Tray past the point where the triangular marks are aligned, it will get stuck inside the machine.
- Press OK.
- Press Start.
- The machine starts printing on the disc.
- Do one of the following:
- If you are printing only one disc, the LCD will display a message telling you that printing is finished. Go to STEP19.
- If you are printing more than one disc, follow these steps:
- Remove the Disc Tray from the Disc Guide.
- Remove the printed disc from the Disc Tray.
- Put a new disc on the Disc Tray.
- Press OK.
- Press Start.
The machine starts printing the next disc.
Repeat STEP a thorough e for each additional disc you want to print.
When you are finished printing, go to STEP19.
If the printed image runs off the edge of the disc, you may need to adjust the disc print position. Click here to see the information for it.
- Remove the Disc Tray from the Disc Guide.
- Remove the Disc Tray from the Disc Guide.
- Remove the disc from the Disc Tray.
- Close the Disc Guide.
- Replace the Disc Tray in the scanner cover.
Commentaires sur le contenu
Ce formulaire a pour seul but de nous faire part de vos commentaires.