MFC-J4610DW
![]() |
FAQ et Diagnostic |
![](/g/b/img/product/mfcj4610dw_us_eu.jpg)
MFC-J4610DW
Date: 12/06/2015 ID: faq00002588_001
Verify if the Brother machine has a dial tone.
To verify your Brother machine has a dial tone, follow the steps below:
- Plug the telephone line cord into your Brother machine (labeled "LINE" for some countries), and then plug the other end directly into the wall telephone jack (socket).
-
Check for a dial tone.
-
Press
(Fax).
-
Check your Brother machine has Hook or Tel or Tel(R).
- If your Brother machine has Hook, press it, and listen for a dial tone. Verify the speaker volume is turned up.
- If your Brother machine has Tel or Tel(R), you can check for a dial tone by connecting an external phone to the jack (socket) labeld EXT.
Or, follow the steps below:
-
Check that the speaker volume is set to LOW, NORMAL (Med) or HIGH (not OFF).
-
Press
(Fax).
-
Press any key on the dial pad.
-
Press Fax Start. The machine scans from the flatbed.
-
When the message Next Page Yes/No is displayed, press NO.
- Listen for a dial tone when the machine starts to dial.
-
Press
MFC-9140CDN, MFC-9330CDW, MFC-9340CDW, MFC-J4410DW, MFC-J4610DW, MFC-J650DW, MFC-J680DW, MFC-L2720DW, MFC-L2730DW, MFC-L2740DW, MFC-L2750DW, MFC-L2752DW
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?
Ce formulaire a pour seul but de nous faire part de vos commentaires.