DCP-J1200W(E)
![]() |
FAQ et Diagnostic |
![](/g/b/img/product/dcpj1200w_eu_as.jpg)
DCP-J1200W(E)
Date: 27/05/2021 ID: faq00000460_521
Reset Your Machine
The following reset functions are available.
Machine Reset
You can reset all the machine’s settings that you have changed, such as Date and Time.
- Press
(STOP) and MONO COPY simultaneously.
The Power LED, Warning LED, and Ink LED light up for one second, and then the Warning LED starts blinking. - Press and hold MONO COPY for two seconds.The machine restarts.
Network
Reset the print server back to its default factory settings (includes Password and IP Address information).
- Press
(Wi-Fi) and
(STOP) simultaneously.
The Power LED, Warning LED, and Ink LED light up for one second, and then the Wi-Fi LED starts blinking. - Press and hold COLOUR COPY for two seconds.The machine restarts.
All Settings
Use this reset function to reset all machine's settings to the settings originally set at the factory.
Brother strongly recommends you perform this operation when you dispose of the machine.
- Press
(STOP) and MONO COPY simultaneously.
The Power LED, Warning LED, and Ink LED light up for one second, and then the Warning LED starts blinking. - Press and hold COLOUR COPY for two seconds.The machine restarts.
DCP-J1200W(E)
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?
Ce formulaire a pour seul but de nous faire part de vos commentaires.