MFC-J4340DW(E)
 |
FAQ et Diagnostic |
MFC-J4340DW(E)
Date: 11/06/2021 ID: faq00000299_520
Set the Date and Time
The LCD displays the date and time. If they are not current, re-enter them. You can add the date and time to each fax you send by setting your Station ID.
MFC-J4340DW
- Press Settings.
- Press
or 
to make your selections: - Select [Initial Setup]. Press OK.
- Select [Date & Time]. Press OK.
- Select [Date]. Press OK.
- Enter the last two digits of the year using the dial pad, and then press OK.
- Enter the two digits for the month using the dial pad, and then press OK.
- Enter the two digits for the day using the dial pad, and then press OK.
- Press or to select [Time], and then press OK.
- Enter the time (in 24-hour format) using the dial pad, and then press OK.
- Press Stop/Exit.
MFC-J4440DW/MFC-J4540DW
- Press
[Settings]. - Press
[Date & Time]. - Press [Date].
- Enter the last two digits of the year on the touchscreen, and then press [OK].
- Enter two digits for the month on the touchscreen, and then press [OK].
- Enter two digits for the day on the touchscreen, and then press [OK].
- Press [Time].
- Enter the time (in 24-hour format) using the touchscreen.Press [OK].
(For example, enter 19:45 for 7:45 PM.)
- Press
.
MFC-J4335DW(XL), MFC-J4340DW(E), MFC-J4535DWXL, MFC-J4540DW(XL)
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?
Ce formulaire a pour seul but de nous faire part de vos commentaires.