FAQs & Troubleshooting

Close

HL-7050N

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 16/10/2006 ID: faq00000027_009

How do I print a network configuration page?

There are several ways of printing a configuration page:


VIA THE PRINTER FRONT PANEL:
  1. Single Line LCD Printers:
    1. Press the '+' key until you see "INFORMATION"
    2. Press the 'SET' key
    3. Use the '+' or '-' keys until you see "PRINT SETTINGS"
    4. Press the 'SET' key and the print configuration pages are printed.
  2. Two Line LCD Printers:
    1. Press the '+' key until you see "MENU" "INFORMATION"
    2. Press the 'SET' key
    3. Use the '+' or '-' keys until you see "INFORMATION" "PRINT SETTINGS"
    4. Press the 'SET' key and the print configuration pages are printed.

VIA THE BRADMIN APPLICATION SOFTWARE:

  1. From the main BRAdmin double click the appropriate printer.
  2. Enter the print server password (the print server password is detailed in the user guide for the print server).
  3. Click the 'Control' tab
  4. Click the 'Print Test Page' option and then click 'OK'. The print configuration pages are printed.

VIA A WEB BROWSER:

  1. Connect to the printer using a web browser.
  2. From the printer device home page select the "Reset & Test" link.
  3. Enter the print server password (the print server password is detailed in the user guide for the print server).
  4. From the "Reset & Test" page select the "Print Configuration" option in the drop down list and then click on the 'Submit' button. The print configuration pages are printed.

VIA THE TEST BUTTON:

  1. Make sure that the printer is switched on.
  2. Locate the NC-3100h, NC-4100h print server.
  3. Locate the TEST button at the rear of the print server.
  4. Press the TEST button, the network configuration page will be printed.

Related Models

HL-2460, HL-7050, HL-7050N

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.