FAQs & Troubleshooting

Close

Model discontinued. This page is no longer updated.

FAX-T94

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 24/08/2006 ID: faq00000261_012

How do I improve the copy or fax quality?

Please clean the print head and the scanner area inside the unit. Follow the steps listed below:

To clean the print head:

  1. Unplug the telephone line and then the power cord.
    When you reconnect these lines later, connect the power cord first, then the telephone line.
  2. Open the top cover by lifting the lever on the right side of the top cover.
  3. Take out the print cartridge.

  1. To clean your fax machine's print head, wipe the print head with a lint-free cloth that is dry or lightly moistened with isopropyl alcohol.
  1. Wait until the alcohol on the print head is completely dry.
  2. Install the print cartridge.
  3. Close the top cover. Press down on both sides of the top cover until it clicks.

To clean the scanner area:

  1. Unplug the telephone line and then the power cord.
    When you reconnect these lines later, connect the power cord first, then the telephone line.
  2. Open the top cover by lifting the lever on the right side of the top cover.

  3. Clean the white bar and the glass strip with isopropyl alcohol on a lint-free cloth.

Be careful not to bend the white film or drop anything into the fax machine.

  1. Close the top cover. Press down on both sides of the top cover until you hear it click into place.

Related Models

FAX-T94, FAX-T96, FAX-T98

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.