TJ-4021TN
Preguntas frecuentes y solución de problemas |
TJ-4021TN
Fecha: 13/03/2019 ID: faqp00100472_000
How to skip the AUTO.BAS program only one time by directly operating the printer
To skip the program at startup, or to calibrate, do the following:
-
Turn off the printer.
-
Press and hold the Feed/Pause Button and then turn on the printer.
-
Release the Feed button when the LED is lit in green.
The LED color will change in the following order:
Amber > Red (5 times) > Amber (5 times) > Green (5 times) > Green/Amber (blinks 5 times alternately) > Red/Amber (blinks 5 times alternately) > Green (lit) (Release the button here)
- The printer will start without running the AUTO.BAS program.
En el caso de que necesite ayuda adicional, póngase en contacto con el servicio de atención al cliente de Brother:
Comentarios sobre el contenido
Con el fin de mejorar nuestro servicio de asistencia, facilite sus comentarios a continuación.
Paso 1: ¿Considera que la información de esta página le ha resultado útil?
Paso 2: ¿Desearía añadir algún comentario?
Tenga en cuenta que este formulario solo se utiliza para comentarios.