PT-P900W/P900Wc
![]() |
Preguntas frecuentes y solución de problemas |
![](/g/b/img/product/p900weuk.jpg)
PT-P900W/P900Wc
Fecha: 03/12/2019 ID: faqp00100008_001
The label does not cut well.
If the label does not cut well or tape is jammed in the cutter, tape adhesive may have built up on the cutter blades after repeated use. To correct this problem, the tape cutter must be cleaned.
Cleaning the tape cutter
Wipe the cutter blades using a dry cotton swab.
-
Frequent cleaning is recommended.
- Cutter blade
- Cotton swab
-
Metal section
Do not touch the cutter blade with your bare hands.
If the problem still occurs, download and install the latest version of the firmware from the [Downloads] section of this website.
PT-P900W/P900Wc, PT-P950NW
En el caso de que necesite ayuda adicional, póngase en contacto con el servicio de atención al cliente de Brother:
Comentarios sobre el contenido
Con el fin de mejorar nuestro servicio de asistencia, facilite sus comentarios a continuación.
Paso 1: ¿Considera que la información de esta página le ha resultado útil?
Paso 2: ¿Desearía añadir algún comentario?
Tenga en cuenta que este formulario solo se utiliza para comentarios.