PJ-662
Preguntas frecuentes y solución de problemas |
PJ-662
Fecha: 24/12/2014 ID: faqp00001454_001
The paper is jammed in the printer.
If paper becomes jammed, remove the paper according to the following procedure.
<Method 1>
Press and hold the (Feed) button.
The drive motor will start and move slowly for a few seconds, then move faster as long as you hold the button down. This can be repeated as many times as necessary.
If this does not eject the jammed paper, try " Method 2" below.
<Method 2>
-
Gently open the release cover completely.
-
Gently pull the paper out of the printer in either direction.
- Close the release cover.
- Insert a new sheet of paper and print again. <see the FAQ: How to insert paper>
En el caso de que necesite ayuda adicional, póngase en contacto con el servicio de atención al cliente de Brother:
Comentarios sobre el contenido
Con el fin de mejorar nuestro servicio de asistencia, facilite sus comentarios a continuación.
Paso 1: ¿Considera que la información de esta página le ha resultado útil?
Paso 2: ¿Desearía añadir algún comentario?
Tenga en cuenta que este formulario solo se utiliza para comentarios.