ADS-2200
![]() |
Preguntas frecuentes y Solución de problemas |
![](/g/b/img/product/ads2200_all.jpg)
ADS-2200
Fecha: 15/02/2018 ID: faq00100438_500
Load a Plastic Card
- Adjust the Paper Guides (1) to fit the width of your document.
- Place the card, face down, top edge first in the ADF between the Paper Guides until you feel it touch the inside of the machine.
- Load only one plastic card at a time.
- Certain types of plastic cards may be scratched when scanned.
- Rigid cards may not be fed correctly.
- If the surface of the card is dirty with grease marks (for example, fingerprints) or similar, wipe the dirt off before scanning.
Preguntas frecuentes relacionadas
ADS-2200, ADS-2700W
En el caso de que necesite ayuda adicional, póngase en contacto con el servicio de atención al cliente de Brother:
Comentarios sobre el contenido
Con el fin de mejorar nuestro servicio de asistencia, facilite sus comentarios a continuación.
Paso 1: ¿Considera que la información de esta página le ha resultado útil?
Paso 2: ¿Desearía añadir algún comentario?
Tenga en cuenta que este formulario solo se utiliza para comentarios.