HL-3140CW
Preguntas frecuentes y Solución de problemas |
HL-3140CW
Fecha: 12/07/2013 ID: faq00003136_000
My Brother machine prints garbage data or blank pages when printing from my Android™ mobile device using Brother iPrint&Scan.
This issue can be resolved by updating Brother iPrint&Scan and your Brother machine's firmware.
- Brother iPrint&Scan
Brother iPrint&Scan needs to be Version 1.12 or later. Download Brother iPrint&Scan (Version 1.12 or later) from the Google Play and install it into your Android™ device. For more information click here to see Brother iPrint&Scan support information.
- Firmware
Your Brother machine must have the required version firmware (Version 1.09 or later). To verify your machine's firmware version follow the steps listed below:
- Press OK.
- Press the Down arrow key to select Machine Info. Press OK.
- Press the Down arrow key to select Version. Press OK.
- Press the Down arrow key to select the fimware version you want to know. Press OK.
- The firmware version is displayed on the machine's display.
If your machine's firmware version is earlier than 1.09, update the machine's firmware. Click here to download the Firmware Update Tool and see more information in the Downloads section to update the firmware.
En el caso de que necesite ayuda adicional, póngase en contacto con el servicio de atención al cliente de Brother:
Comentarios sobre el contenido
Con el fin de mejorar nuestro servicio de asistencia, facilite sus comentarios a continuación.
Paso 1: ¿Considera que la información de esta página le ha resultado útil?
Paso 2: ¿Desearía añadir algún comentario?
Tenga en cuenta que este formulario solo se utiliza para comentarios.