DCP-J1100DW
![]() |
Preguntas frecuentes y Solución de problemas |
![](/g/b/img/product/dcpj1100dw_eu_as.jpg)
DCP-J1100DW
Fecha: 22/03/2019 ID: faq00003017_510
Copy an ID Card
Use the [2in1(ID)] feature to copy both sides of an identification card onto one page, keeping the original card size.
![](/g/b/img/faqend/faq00003017_510/eu_ot/en/2231541/GUID-8B30C323-927E-4E0A-86BD-DEE99D5184F2-low.gif)
Make sure the paper size is set to A4 or Letter.
- You may copy an identification card to the extent permitted under applicable laws. For more detailed information, see the Product Safety Guide.
- Place your identification card face down near the upper-left corner of the scanner glass.
- 3 mm or greater (top, left)
- 207 mm
- 145 mm
- Scannable area
- Press
[Copy].
- Enter the number of copies in one of the following ways:
- Press [-] or [+] on the touchscreen.
- Press
to display the keyboard on the touchscreen, and then enter the number of copies using the touchscreen keyboard. Press [OK].
- Press .
- Read and confirm the displayed list of settings you have selected. When you have finished changing settings, press [OK].
- Press [Mono Start] or [Colour Start].The machine starts scanning one side of the identification card.
- After the machine has scanned the first side, turn over the identification card and press [Continue] to scan the other side.
DCP-J1100DW, MFC-J1300DW
En el caso de que necesite ayuda adicional, póngase en contacto con el servicio de atención al cliente de Brother:
Comentarios sobre el contenido
Con el fin de mejorar nuestro servicio de asistencia, facilite sus comentarios a continuación.
Paso 1: ¿Considera que la información de esta página le ha resultado útil?
Paso 2: ¿Desearía añadir algún comentario?
Tenga en cuenta que este formulario solo se utiliza para comentarios.