DCP-L2627DW(XL)
Preguntas frecuentes y Solución de problemas |
DCP-L2627DW(XL)
Fecha: 07/09/2023 ID: faq00002674_004
Self-Diagnostic
If the machine's display displays the following self-diagnostic messages, follow these steps:
- Self-Diagnostic
Cause
- The fuser unit does not work correctly.
- The fuser unit is too hot.
Action
-
(For a certain model)
To prevent you from losing the received fax data in the machine's memory, transfer the data to another Fax machine or to your computer before turning off the machine. -
Press and hold (Power) to turn off the machine, wait a few seconds, and then turn it on again.
Leave the machine idle for 15 minutes with the power on.
DCP-L2620DW, DCP-L2627DW(XL), DCP-L2627DWE, DCP-L2660DW, DCP-L5510DW, HL-L2400DW, HL-L2400DWE, HL-L2445DW, HL-L2865DW, HL-L5210DN, HL-L5210DW, HL-L5215DN, HL-L6210DW, HL-L6410DN, HL-L6415DN, MFC-L2800DW, MFC-L2827DW(XL), MFC-L2860DW, MFC-L2860DWE, MFC-L2960DW, MFC-L2980DW, MFC-L5710DN, MFC-L5710DW, MFC-L5715DN, MFC-L6710DW, MFC-L6910DN, MFC-L6915DN
En el caso de que necesite ayuda adicional, póngase en contacto con el servicio de atención al cliente de Brother:
Comentarios sobre el contenido
Con el fin de mejorar nuestro servicio de asistencia, facilite sus comentarios a continuación.
Paso 1: ¿Considera que la información de esta página le ha resultado útil?
Paso 2: ¿Desearía añadir algún comentario?
Tenga en cuenta que este formulario solo se utiliza para comentarios.