MFC-9330CDW
![]() |
Preguntas frecuentes y Solución de problemas |
![](/g/b/img/product/mfc9330cdw_us_eu_as.jpg)
MFC-9330CDW
Fecha: 21/11/2013 ID: faq00002674_001
Fuser Error or Self-Diagnostic
- The temperature of the fuser unit does not rise to a specified temperature within the specified time.
- The fuser unit is too hot.
Please follow the steps below to solve the problem:
- Turn the machine's power switch off, wait a few seconds, and then turn it on again.
- Leave the machine for 15 minutes with the power on.
- If the error still remains, please contact Brother Customer Service from "Contact Us" or call your dealer and report the error status, Fuser Error or Self-Diagnostic.
DCP-1510, DCP-1610W, DCP-1612W, DCP-8110DN, DCP-8250DN, DCP-9015CDW, DCP-9020CDW, HL-3140CW, HL-3150CDW, HL-3170CDW, HL-5440D, HL-5450DN, HL-5470DW, HL-6180DW, MFC-1810, MFC-1910W, MFC-8510DN, MFC-8520DN, MFC-8950DW, MFC-9140CDN, MFC-9330CDW, MFC-9340CDW
En el caso de que necesite ayuda adicional, póngase en contacto con el servicio de atención al cliente de Brother:
Comentarios sobre el contenido
Con el fin de mejorar nuestro servicio de asistencia, facilite sus comentarios a continuación.
Paso 1: ¿Considera que la información de esta página le ha resultado útil?
Paso 2: ¿Desearía añadir algún comentario?
Tenga en cuenta que este formulario solo se utiliza para comentarios.