DCP-7045N
![]() |
Preguntas frecuentes y Solución de problemas |
![](/g/b/img/product/dcp7045n_eu.jpg)
DCP-7045N
Fecha: 14/01/2008 ID: faq00000261_031
How do I clean the scanner to improve the copy quality?
Follow steps below:
- Turn off the machine's power switch. Disconnect all cables, and then unplug the power cord from the AC power outlet.
- Lift the document cover (1). Clean the white plastic surface (2) and scanner glass (3) underneath it with a soft lint-free cloth moistened with water.
![](/g/b/img/faqend/faq00000261_031/eu_ot/en/14113/scannerglass_05.gif)
- In the ADF unit, clean the white bar (1) and the scanner glass strip (2) under it with a soft lint-free cloth moistened with water.
![](/g/b/img/faqend/faq00000261_031/eu_ot/en/14114/scannerglass_06.gif)
- Plug the machine's power cord back into the AC power outlet first, and reconnect all cables. Turn on the machine's power switch.
In addition to cleaning the scanner glass and glass strip with a soft lint-free cloth moistened with water, run your finger tip over the glass to see if you can feel anything on it. If you feel dirt or debris, clean the glass again concentrating on that area. You may need to repeat the cleaning process three or four times. To test, make a copy after each cleaning.
En el caso de que necesite ayuda adicional, póngase en contacto con el servicio de atención al cliente de Brother:
Comentarios sobre el contenido
Con el fin de mejorar nuestro servicio de asistencia, facilite sus comentarios a continuación.
Paso 1: ¿Considera que la información de esta página le ha resultado útil?
Paso 2: ¿Desearía añadir algún comentario?
Tenga en cuenta que este formulario solo se utiliza para comentarios.