DCP-7065DN
Preguntas frecuentes y Solución de problemas |
DCP-7065DN
Fecha: 04/02/2011 ID: faq00000231_036
Wrinkles or creases
Please check the following points to solve the problem:
- Make sure that the paper is loaded properly.
- The paper is below the maximum paper mark (1). Over filling the paper tray will cause paper jams.
- The side to be printed on must be face down.
- The paper guides touch the sides of the paper so it will feed properly. If the guides are too tight or too loose against the paper stack, slide the paper guides to fit the paper size.
- The paper is below the maximum paper mark (1). Over filling the paper tray will cause paper jams.
- Check the paper type and quality.
Please refer to FAQs, "What kind of paper can I use?" and "What is the recommended paper?"
- Turn over the stack of paper in the tray or try rotating the paper 180 degree in the paper tray.
En el caso de que necesite ayuda adicional, póngase en contacto con el servicio de atención al cliente de Brother:
Comentarios sobre el contenido
Con el fin de mejorar nuestro servicio de asistencia, facilite sus comentarios a continuación.
Paso 1: ¿Considera que la información de esta página le ha resultado útil?
Paso 2: ¿Desearía añadir algún comentario?
Tenga en cuenta que este formulario solo se utiliza para comentarios.