HL-L5200DW(T)
![]() |
Preguntas frecuentes y Solución de problemas |
![](/g/b/img/product/hll5200dw_us_eu_as.jpg)
HL-L5200DW(T)
Fecha: 26/02/2020 ID: faq00000110_500
Set Sleep Mode Countdown
The Sleep Mode (or Power Save Mode) setting can reduce power consumption. Select how long the machine must be idle before it goes into Sleep Mode. The Sleep Mode timer is reset when the machine receives a print job.
When the machine is in Sleep Mode, it acts as if it is turned off. The machine will wake up and start printing when it receives a print job. Use these instructions to set a time delay (countdown) before the machine enters Sleep Mode.
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
- Press
or
to select the [General Setup] option, and then press OK.
- Press
or
to select the [Ecology] option, and then press OK.
- Press
or
to select the [Sleep Time] option, and then press OK.
- Press
or
to enter the length of time, in minutes, that the machine should remain idle before entering Sleep Mode.
Press Go.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
- Press
.
- Enter the length of time (maximum 50 minutes) the machine will remain idle before entering Sleep Mode, and then press [OK].
- Press
.
HL-L5000D, HL-L5100DN(T), HL-L5200DW(T), HL-L6250DN, HL-L6300DW(T), HL-L6400DW(T), HL-L6450DW
En el caso de que necesite ayuda adicional, póngase en contacto con el servicio de atención al cliente de Brother:
Comentarios sobre el contenido
Con el fin de mejorar nuestro servicio de asistencia, facilite sus comentarios a continuación.
Paso 1: ¿Considera que la información de esta página le ha resultado útil?
Paso 2: ¿Desearía añadir algún comentario?
Tenga en cuenta que este formulario solo se utiliza para comentarios.