Innov-is M380D
 |
Ofte stillede spørgsmål og fejlfinding |
Innov-is M380D
Dato: 03-03-2020 Id: faqh00101021_000
How to use the foot controller with the machine
You can also use the foot controller to start and stop sewing.
- When the foot controller is connected, you cannot use the “Start/Stop” button.
- Bobbin winding can be started and stopped with the foot controller.
- The foot controller cannot be used when embroidering.
-
Turn off the machine.
-
Insert the foot controller plug into the foot controller jack on the machine.
(1) Foot controller jack
-
Turn on the machine.
-
Slowly depress the foot controller to start sewing.
The speed that is set using the sewing speed controller will be the foot controller’s maximum sewing speed.
-
Release the foot controller to stop the machine.
Kontakt Brother Support, hvis du har brug for yderligere hjælp:
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.
Trin 1: Hvor hjælpsom har oplysningerne på denne side været?
Trin 2: Ønsker du at tilføje kommentarer?
Bemærk, at denne formular kun bruges til feedback.