CM700
 |
Ofte stillede spørgsmål og fejlfinding |
CM700
Dato: 28-08-2018 Id: faqh00000751_000
"Patterns cannot be welded. There are some patterns which cannot accept or no overlaps." message appearing on the LCD. What does it mean?
The message appears when you are welding patterns.
-
The patterns do not overlap. Rearrange them so the selected patterns overlap. Unifying the pattern, instead, can be an alternative editing method depending on your project.
-
A pattern that has a seam allowance is selected. Deactivate the seam allowance setting and weld the patterns.
- An open shape is selected as a pattern. Only closed shapes can be welded. Unifying the pattern, instead, can be an alternative editing method depending on your project.
Perform the necessary operation according to the instructions or the solution described.
If the problem persists, contact the Brother customer service or the nearest authorized service center.
Kontakt Brother Support, hvis du har brug for yderligere hjælp:
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.
Trin 1: Hvor hjælpsom har oplysningerne på denne side været?
Trin 2: Ønsker du at tilføje kommentarer?
Bemærk, at denne formular kun bruges til feedback.