Innov-is V5
 |
Ofte stillede spørgsmål og fejlfinding |
Innov-is V5
Dato: 07-11-2012 Id: faqh00000676_001
If the thread breaks during sewing.
- Press the “Start/Stop” button to stop the machine.
- If the upper thread is broken, redo the upper threading. If the bobbin thread is broken, press
.
- Press "OK". After the thread is automatically cut, the carriage will move.
- Unlock the frame-securing lever and remove the embroidery frame.
Be careful not to apply strong force to the fabric at this time. Otherwise, the fabric may loosen in the frame.
- Insert a wound bobbin into the machine.
- Press "OK". The carriage will return to its original position.
- Attach the embroidery frame.
- Press
. 
- Press "-1", "-10", "-100" or "-500" to move the needle back the correct number of stitches before the spot where the thread broke.
- If you cannot move back to the spot where the thread broke, press
to select the color and move to the beginning position of that color, then use "+1", "+10", "+100" or "+500" to move ahead to slightly before where the thread broke.
- If you cannot move back to the spot where the thread broke, press
- Press "CLOSE" to return to the original screen.
- Press the “Presser Foot Lifter” button to lower the presser foot, and press the “Start/ Stop” button to continue sewing.
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.
Trin 1: Hvor hjælpsom har oplysningerne på denne side været?
Trin 2: Ønsker du at tilføje kommentarer?
Bemærk, at denne formular kun bruges til feedback.