Innov-is 10/10A
 |
Ofte stillede spørgsmål og fejlfinding |
Innov-is 10/10A
Dato: 12-12-2018 Id: faqh00000379_000
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
Please check the Bobbin Winder.
If the Bobbin Winder shaft is moved to the right position (bobbin winding mode), the needle will not move.
Please return the Bobbin Winder shaft to the left position and press the Start-Stop Button or Foot Control to start the machine in the sewing mode.
AZ14, AZ17, BC-2100/2300, BC-2500, CS10, CS-8120, DS-120, DS-140, FS100WT, FS-20, FS-40, HF27, HF37, HF53, Innov-is 10/10A, Innov-is 1200, Innov-is 1250, Innov-is 15, Innov-is 27SE, Innov-is 30, Innov-is 35, Innov-is 50, Innov-is 500D, Innov-is 55, Innov-is 55FE, Innov-is 750E, Innov-is 900, Innov-is 950, J14, J14s, J17, J17s, KD144, KD144s, KD40, KE14, KE14s, KE20, LB14, LM14, LP14, LW14, NX-200, NX-400Q/400, NX-600, PE-300S, RH127, RH137, RL417, RL425, X14, X14s, X17s, XL-2600/2610/2620, XN1700, XN2500, XQ2700, XQ3700, XT27, XT37
Kontakt Brother Support, hvis du har brug for yderligere hjælp:
Feedback til indhold
Bemærk, at denne formular kun bruges til feedback.