Innov-is 10/10A
 |
Ofte stillede spørgsmål og fejlfinding |
Innov-is 10/10A
Dato: 12-12-2018 Id: faqh00000003_000
When thread got tangled.
-
When a machine stops operation due to tangled thread, do not turn the pulley by force.
If the pulley is turned by force then, lower thread might not be picked up correctly and stitches might not be formed correctly.
- If threads get tangled, remove a needle plate and cut the tangled threads by scissors or cutter.
BC-2100/2300, BC-2500, CS10, CS-8120, DS-120, DS-140, FS100WT, FS-20, FS-40, HF27, HF37, HF53, Innov-is 10/10A, Innov-is 1200, Innov-is 1250, Innov-is 15, Innov-is 1500D/1500, Innov-is 150SE/ 150, Innov-is 200, Innov-is 2200, Innov-is 27SE, Innov-is 30, Innov-is 35, Innov-is 350SE, Innov-is 400, Innov-is 4000D/4000, Innov-is 50, Innov-is 5000, Innov-is 500D, Innov-is 55, Innov-is 550SE/ 550, Innov-is 55FE, Innov-is 600, Innov-is 750E, Innov-is 900, Innov-is 950, Innov-is I, Innov-is Ie, Innov-is V3, Innov-is V3 LE, Innov-is V5, Innov-is V5 LE, Innov-is V7, Innov-is VQ2, Innov-is VQ4, J14, J17, KD144, KD40, KE14, KE20, NX-200, NX-2000, NX-400Q/400, NX-600, PE-300S, PQ1600S, QC-1000, RH127, RH137, RL417, RL425, SuperGalaxie 3000/3000C/3000D/3100D, X14, XL-2600/2610/2620, XN1700, XN2500, XQ2700, XQ3700, XT27, XT37
Kontakt Brother Support, hvis du har brug for yderligere hjælp:
Feedback til indhold
Bemærk, at denne formular kun bruges til feedback.