MFC-L6900DW(T)
![]() |
Ofte stillede spørgsmål og fejlfinding |
![](/g/b/img/product/mfcl6900dw_us_eu_as.jpg)
MFC-L6900DW(T)
Dato: 29-08-2023 Id: faq00100800_000
My printer takes a long time to start printing when using Airprint. (iOS 16)
Try one of the following methods to enable IPv6:
> Using the Touchscreen (Touchpanel models)
> Using the Touchscreen (1 Line LCD models)
Using Web Based Management
-
Print the Network Configuration report.
> Click here to see how to print the Network Configuration Report. - On a computer that's connected to the same network as your machine, open a web browser.
-
Type the IP address listed on the Network Configuration report into your browser's address bar, and then press Enter.
The machine's web interface will open. (For example: http://192.168.1.105) -
Click Network > Wired or Wireless > IPv6 (Wired) or IPv6 (Wireless).
-
Select Enabled, and then click submit.
Using the Touchscreen (Touchpanel models)
- Press the Settings menu.
- Press Network.
- Select Wired LAN or WLAN.
- Select TCP/IP.
- Press ▲ or ▼ to select IPv6.
- Select On.
- Turn the machine off and then on again.
Using the Touchscreen (1 Line LCD models)
- Press ▲ or ▼ to select Settings.
- Press ▲ or ▼ to select Network.
- Select Wired LAN or WLAN and press OK.
- Press ▲ or ▼ to select TCP/IP and press OK.
- Press ▲ or ▼ to select IPv6 and press OK.
- Press ▲ or ▼ to select On and press OK.
- Turn the machine off and then on again.
Kontakt Brother Support, hvis du har brug for yderligere hjælp:
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.
Trin 1: Hvor hjælpsom har oplysningerne på denne side været?
Trin 2: Ønsker du at tilføje kommentarer?
Bemærk, at denne formular kun bruges til feedback.