DCP-J1200W(E)
![]() |
Ofte stillede spørgsmål og fejlfinding |
![](/g/b/img/product/dcpj1200w_eu_as.jpg)
DCP-J1200W(E)
Dato: 27-05-2021 Id: faq00100704_501
Configure Network Settings Using the Control Panel
To configure the machine for your network, use the control panel buttons.
Network Settings
Function | Button 1 | Button 2 | Instructions |
---|
Enable the One Push Method of Wi-Fi Protected Setup™ (WPS). | ![]() | - | Press the button three times. |
Enable the PIN Method of Wi-Fi Protected Setup™ (WPS). | ![]() | - | Press the button five times. |
Enter Wi-Fi Mode. | ![]() | ![]() | Press the buttons simultaneously. |
Set Wireless Direct to On. Print the Wireless Direct Information Sheet. | ![]() | ![]() | Press the buttons simultaneously. |
Print the Network Configuration Report Sheet. | ![]() | MONO COPY | Press the buttons simultaneously. |
Restart Wi-Fi and Wireless Direct. Use this function to solve wireless network problems. | ![]() | COLOUR COPY | Press the buttons simultaneously. |
Wi-Fi Mode
Function | Button | Instructions |
---|
Print the WLAN Report. | ![]() | Press the button once. |
Enable or disable Wireless Direct. | ![]() | Press the button once. |
Enable or disable Wi-Fi. | MONO COPY | Press the button once. |
Reset the Network settings. | COLOUR COPY | Press and hold the button for two seconds. |
DCP-J1200W(E)
Kontakt Brother Support, hvis du har brug for yderligere hjælp:
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.
Trin 1: Hvor hjælpsom har oplysningerne på denne side været?
Trin 2: Ønsker du at tilføje kommentarer?
Bemærk, at denne formular kun bruges til feedback.